hps www.vishay.com vishay sfernice revision: 12-jul-12 1 document number: 52015 for technical questions, contact: sfer@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high ohmic value (up to 1.5 g ? ), high power resistors (up to 10 w at 25 c) thick film features ? rohs for most values, please consult us ? high ohmic values up to 1.5 g ? ? power rating up to 10 w at + 25 c ? molded or coated ? ceramic core ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 marking geka trade-mark, series, styl e, nominal resistance (in ? ), tolerance (in %), letter p for tcr 150 ppm/c, manufacturing date. because of lack of space, small styles are marked with ohmic value (in ? ), tolerance (in %) and letter p. dimensions in millimeters series and style a? b? e 0.1 weight g finish hps58 6.5 0.2 2.4 0.1 0.6 0.24 molded hps63 10 0.2 3.7 0.1 0.29 hps68 15 0.2 5.6 0.3 0.8 0.67 hps523 23 2.3 5 0.3 1.23 coated hps923 23 2.5 9 0.5 4.60 hps932 32 2.5 9 0.5 5.27 hps947 47 2.5 9 0.5 7.18 standard electrical specifications model resistance range ? rated power p 25 c w limiting element voltage v tolerance % temperature coefficient ppm/c critical resistance ( ? ) climatic category hps58 200 to 100m 1 300 0.5, 1, 2, 5, 10 150 90k - 55 c/ + 200 c/ 56 days hps63 200 to 175m 2 700 0.5, 1, 2, 5, 10 150 245k hps68 300 to 400m 3 1500 0.5, 1, 2, 5, 10 150 750k hps523 800 to 650m 4 2000 0.5, 1, 2, 5, 10 150 1m hps923 1k to 1g 6 2500 0.5, 1, 2, 5, 10 150 1.041m hps932 1k to 1g 8 5000 0.5, 1, 2, 5, 10 150 3.125m hps947 2k to 1.5g 10 8000 0.5, 1, 2, 5, 10 150 6.4m ordering information hps 68 50 m ? 10 % 150 ppm/c bl20 e1 model size ohmic value tolerance temperature coefficient packaging lead (pb)-free a l max . 4 4 a molded coated 25 min. 25 min. 25 min. 25 min. ? e ? a 0.02 ? b ? e ? b 45 chamfer max. 0.25 mm deep
hps www.vishay.com vishay sfernice revision: 12-jul-12 2 document number: 52015 for technical questions, contact: sfer@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 global part number information global model style ohmic value tolerance temperature coefficient packaging special hps hps : 58 to 947 the first three digits are significant figures and the last digit specifies the number of zero s to follow. r designates decimal point. 1006 = 100 m ? 5104 = 5.1 m ? 3303 = 330 k ? 5005 = 50 m ? ... d = 0.5 % f = 1 % g = 2 % j = 5 % k = 10 % p = 150 ppm k = 100 ppm b15 = blister (20 pieces) b19 = blister (30 pieces) a18 = ammopack (400 pieces) a20 = ammopack (500 pieces) b17 = blister (25 pieces) r10 = reel (500 pieces) as applicable as applicable 0068500 k b 5 p s h 5p1
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
